Design · Manufacturing · Installation · SupportITEN +39 091 854 6722 · info@hospitaldivision.com Reserved area

Home / Hospital doors / Service doors

Service doors

Service doors for hospitals

Sturdy and hygienic, for every room on the ward: storage rooms, technical rooms, offices and toilets. Hinged or sliding, with solid panel, glass or a mix of both.

No honeycomb cardboardLaminate, MDF and class 1 polystyrene panel
Antibacterial handleAnd key lock, always included
No visible screwsTelescopic jamb lining
Up to 51 dBWith drop-down bottom seal, on request

Configurations

Choose opening type and infill.

Hinged

The most common choice for service rooms, storage rooms and technical rooms, where there is space for the leaf to open.

Sliding

The leaf slides parallel to the wall, for when there is little space in front of the door.

Panel, glass or mixed

Full panel, full glass, or half glass and half panel.

Equipment

Included as standard, and on request.

Included as standard

  • Key lock
  • Antibacterial handle
  • Telescopic jamb lining with no visible screws
  • 5-layer compound panel

On request

  • 51 dB drop-down bottom seal (hinged doors)
  • 1.5 mm stainless steel stretcher-impact guard
  • Panic bar

Installed

Service doors, already on the wards.

See all photos
Service door, white swing leaf with lever handle and lock
Service door with ventilation grille in a hospital ward
Service door with light blue panel and ventilation grille
White service doors along a ward corridor
Technical data

Technical features

Profile45 mm aluminium, non-flush with overlap, slim or heavy-duty
Panel40 mm 5-layer compound: 0.9 mm laminate, MDF and class 1 self-extinguishing expanded polystyrene core, no cardboard honeycomb
InfillFull panel, full glass (heavy-duty profile only) or half glass and half panel
OpeningSwing or sliding, single or double leaf, manual or automatic
Standard equipmentKey lock, antibacterial handle, telescopic jamb with no visible screws
Manual sliding doorAnodised aluminium track and cover, 2 flush pulls and 2 carriages per leaf
On request51 dB bottom seal (swing doors), 1.5 mm stainless steel kick plate, panic bar, ventilation grille, vacant/engaged indicator, push button for accessible WCs, access control
ColoursProfile RAL 9010 standard, other RAL on request
SizesMade to measure from the wall opening · standard height 2100 mm, other sizes on request
Fire resistanceThey are not fire-rated (REI) doors: fire compartments need certified REI doors
FAQ

Questions from designers.

Do you use cardboard honeycomb cores?

No. All service doors have the 5-layer compound panel with a solid class 1 expanded polystyrene core: it withstands humidity and impacts better and holds hardware and automation over time.

Are the service doors fire-rated (REI)?

No, they are not fire-resistant doors. Where the project requires fire compartments, certified REI doors must be used.

Slim or heavy-duty profile?

The slim profile takes up less space, with handle and lock on the panel. The heavy-duty profile is sturdier, carries handle and lock on the aluminium profile and is required for the full-glass version and for flush leaf and panel.

Can noise between rooms be reduced?

Yes: swing doors can have the 51 dB drop-down bottom seal, which closes the gap under the leaf when the door is closed.

Can a panic bar be fitted?

Yes, on request. With a panic bar on the opposite side, a handle is fitted instead of the lock.

Are automatic versions available?

Yes, both swing and sliding, single or double leaf. Let us know in your request and we will propose the right automation for the room.

Do you have a project or a door schedule?

Send it to us: we will reply with a quote and support for the tender specification.